Holding Power Chamber. This device is used for test tape adhesive strength under high temperature and constant-temperature motionless static load condition.

When testing the adhesive which would be used in higher temperature environment, the temperature control chamber is the principle part, and attached fixture for hanging the specimen for testing the adhesive retention. Provide the constant temperature when testing and record the time of adhesive coming off. Testing temperature is adjustable by request. Pay attention on the floating speed of air circulation in the chamber when testing, to see if that would effects the force on specimen.

Specs	Description
Testing jig	10Sets, able to use individually
Electric Controller	After all specimen has dropped, Buzzer (with a switch) will make a sound, and automatically shut-off heater.
Stainless Steel	SUS#304, 10 pcs。
Loading Weight	1 kg (or other specification), 10Pcs, made by stainless steel.
Timer	Electrical LCD screen, keep the testing time automatically, 9999 hours and 59 seconds, total 10Pcs.
Weight	80kg
Dimension	100X50X92(h)cm
Temperature	Room ~ 200℃, microcomputer PID automatic calculate, 0.1℃ displayer, ±0.3℃